Restoring To Factory Default; Restoring Back To Factory Default Settings; Manual Hard Restore - Brainboxes ES-357 Product Manual

14. Restoring to Factory Default

Restoring back to Factory Default Settings

We strongly recommend that you check that the device is NOT in operation before doing this to
prevent data loss.
If for any reason you wish to restore the ES device back to factory default settings:
1) Open Boost.LAN Manager
2) Find and select the ES device.
3) On the left hand side of the window, scroll down to the "Other Tasks" section
4) Select "Restore Factory Settings"
5) The ES device will beep to indicate that the device has been restored back to factory settings.
See Section 3 for factory default settings.

Manual Hard Restore

1) Press and hold the reset button on the ES device until it beeps.
2) Once the ES device has beeped, then you can release the reset button.
3) The device will then be restored to factory settings.
ES Range Product Manual
Version 2.9
© Copyright Brainboxes Limited 2013
Page 51 of 66