Table of Contents
Advertisement
9. Advanced Configuration
ES devices store the device settings inside the device. When you access the webpage it gets these
settings from the device. When you access the driver it gets the settings from the device too. If you
have Boost.LAN closed and change a setting on the webpage, the device driver will not know that the
settings have been changed on the webpage until Boost.LAN is opened. When Boost.LAN first opens
it will update the settings of any installed devices. Therefore you need to open Boost.LAN manager
after changing a setting on the webpage in order for the driver to use this new setting.
IP Addressing
The IP settings can be easily changed by clicking the "Change" link available in the "Device
Info" section on the left hand panel of Boost.LAN Manager.
This will bring up the following dialogue box.
As mentioned in the "Features" section of this manual, the ES device is shipped in DHCP
Mode. On connecting to the network, the device automatically checks if it is connected to a
DHCP Server. If this is the case, the DHCP server will allocate an IP address automatically to
the ES device.
ES Range Product Manual
Version 2.9
© Copyright Brainboxes Limited 2013
Page 32 of 66
Hide quick links:
Advertisement
Table of Contents
