Allen-Bradley 1756-CNB User Manual page 158

158 Set Up EtherNet/IP Communication Across Subnets
Publication 1756-UM523F-EN-P - December 2006
MSG Parameter Value
Message Type CIP Generic
Service Type Get Attribute Single
Service Code e
Class c0
Instance 1
Attribute 4
Source Element
Source Length
Destination ChasB_RedundancyState
Path Specify the 1756-ENBT module in Chassis B. Use either of these
(communication tab) methods:
• Add the module to the I/O configuration of the controller. Then
• Type the path using port numbers and addresses.
use the Browse button on the Communication tab to identify
the module.