Additional functions
Wipe protection
The hob sensor controls can be
locked for 20 seconds, e.g. to remove
soiling. The sensor control is not
locked.
Activating
Touch the sensor control.
Touch the sensor control.
The time counts down in the timer dis-
play.
Deactivating
Touch the sensor control until the
timer display goes out.
Demo mode
These functions enable the hob to be
demonstrated in showrooms without
heating up.
Activating/deactivating demo mode
When this mode is set, the hob can be
operated as normal.
Switch the hob on.
Place an induction-compatible item
of cookware on the hob.
Touch and hold the 0 and 2 sensor
controls on the numerical display at
the same time for 6 seconds.
In the timer display, flashes altern-
ately with (demo mode activated)
or (demo mode deactivated) for a
few seconds.
50
Displaying hob data
The model number and software ver-
sion of the hob can be displayed.
Model number/serial number
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 4 sensor
controls on the numerical display at
the same time.
Numbers will appear in the timer display
one after another, separated by a dash.
Example: (model number
KM 1234) – (serial num-
ber)
Software version
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 3 sensor
controls on the numerical display at
the same time.
Numbers appear in the timer display:
Example: : = software version 2.00