Wipe Protection; Demonstration Mode; Displaying Hob Data - Miele KMDA 7633 FR Operating And Installation Instructions

Wipe protection

The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The  is not locked.
Activating
 Touch the  sensor.
The time will count down in the timer
display.
Deactivating
 Touch the  sensor until the timer
display goes out.

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display,  flashes
alternately with  (demonstration mode
activated) or  (demonstration mode
deactivated) for a few seconds.
Additional functions

Displaying hob data

The model number and software
version of the hob can be displayed.
There must not be any pots or pans on
the hob.
Model designation
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 4 sensor
controls at the same time.
The timer display shows 2 numbers
flashing alternately:
Example:  flashing alternately with 
= KM 1234
Software version
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 3 sensor
controls at the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00
47