Additional functions
Wipe protection
The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The is not locked.
Activating
Touch the sensor.
The time will count down in the timer
display.
Deactivating
Touch the sensor until the timer
display goes out.
Demonstration mode
This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
52
Displaying hob data
The model number and software
version of the hob can be displayed.
There must not be any pots or pans on
the cooking zones.
Model number/Serial number
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Touch the 0 and 4 sensor controls at
the same time.
Numbers will appear in the timer display
one after another, separated by a dash.
Example: (model number
KM 1234) – (serial
number)
Software version
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Touch the 0 and 3 sensor controls at
the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00