Cubase/Nuendo + Sigma + Avid® Artist Series Control Surface (Eucon); Sigma Browser Settings - Solid State Logic Sigma User Manual

®
C /N + S + A A S C S (e )
UbASe UeNDo IGmA vID rTIST erIeS oNTroL UrFACe UCoN
In this example we will configure Sigma to work together with a Artist Series Control Surface such as the Artist Control ® .
The MCU and Eucon protocols are able to work simultaneously. When using a Eucon control surface, banking is done in
the Eucon domain and does not affect automation streams on Sigma.
In this example we will configure Sigma to work with Pro Tools on ipMIDI channels 1 and 2.

Sigma browser Settings

1. Go to the SeTTINGS page in the Sigma browser.
2. Set the DAw/ProToCoL to be CUbASe/NUeNDo (mCU) from the drop-down box
3. Set CHANNeLS 1-8 to ipmIDI Port 1 and set CHANNeLS 9-16 to ipmIDI Port 2 .
Page 58