Table of Contents
Advertisement
Network Connection Configuration - macintosh
• On your computer go to System Preferences and click on the Network icon.
• Set Configure IPv4 to manually then fill in the IP Address and Subnet mask boxes with the numbers shown below. The
IP address should be in the 192.168.1.X range with a Subnet of 255.255.255.0.
'X' should be a number between 3 and 254. Make sure that the 'X' number is not the same as Sigma's address and/or
any other device on the network.
Network Connection Configuration - windows
• Go to Network and go into Local Area Connection Properties.
• Open up the option Internet Protocol version 4 (TCP/IPv4).
• Select Use the following IP address and then fill in the IP Address and Subnet mask boxes as shown below.
Page 15
Advertisement
Table of Contents
Need help?
Do you have a question about the Sigma and is the answer not in the manual?
Questions and answers