Logic Control Surface Settings - Solid State Logic Sigma User Manual

Logic Control Surface Settings

First, we'll set up Sigma.
1. Open Logic.
2. Go to Preferences > Control Surfaces Setup...
3. Choose New and then Install...
4. Select a mackie Designs - mackie Control and click Add.
5. Set the output Port and Input Port to Port 1.
6. Now select a mackie Designs - mackie Control extender from the list and click Add.
7. Set the output Port and Input Port to Port 2.
Important: Please ensure you are selecting the Mackie Designs - Mackie Control Surface and NOT the Mackie Designs
- Logic Control Surface. The Logic Control Surface sends different messages and Sigma will not respond to these.
Page 51