Pro Tools + Sigma + Nucleus (Or Any Standard Hui Control Surface); Sigma Browser Settings - Solid State Logic Sigma User Manual

P T + S + N ( HUI C S )
ro ooLS IGmA UCLeUS or ANY STANDArD oNTroL UrFACe
In this example we will configure Sigma to work together with a Nucleus. You could follow the setup procedure for Pro Tools
+ Sigma (no control surface) however, when using a HUI controller, banking through channels will mis-align the
automation data. e.g. if you use the 'Channel Right' button a Nucleus to make the second track in the session appear on
Channel 1 of Nucleus, your automation stream from the second track in your DAW will drive the first analogue channel of
Sigma - not what we want!
To solve this problem, we have provided a mIDI automation mode, as found in our Matrix console. This mode works by
using MIDI tracks in your session to control the analogue gains directly, rather than over the HUI/MCU protocols. Therefore,
banking does not have any unwanted effects on the automation data.

Sigma browser Settings

1. Go to the SeTTINGS page in the Sigma browser.
2. Set DAw/ProToCoL to mIDI from the drop-down box.
3. Disable the HANDSHAkING button.
4. Go to the mIDI AbSoLUTe mode and pick an ipmIDI Port - e.g. Port 9.
Note that the CHANNELS 1-8 and CHANNELS 9-16 boxes have no effect when using MIDI.
Page 38