Logic + Sigma + Avid® Artist Series Control Surface (Eucon); Sigma Browser Settings; Artist Controller Settings - Solid State Logic Sigma User Manual

®
L + S + A A S C S (e )
oGIC IGmA vID rTIST erIeS oNTroL UrFACe UCoN
In this example we will configure Sigma to work together with a Artist Series Control Surface such as the Artist Control ® .
The MCU and Eucon protocols are able to work simultaneously. When using a Eucon control surface, banking is done in
the Eucon domain and does not affect automation streams on Sigma.
In this example we will configure Sigma to work with Logic on ipMIDI channels 1 and 2.

Sigma browser Settings

We will set up Sigma to work on ipMIDI channels 1 & 2.
1. Go to the SeTTINGS page in the Sigma browser.
2. Set DAw/ProToCoL to LoGIC (mCU) from the drop-down box.
3. Set CHANNeLS 1-8 to ipmIDI Port 1 and set CHANNeLS 9-16 to ipmIDI Port 2 .

Artist Controller Settings

You should not be required to set up any additional functionality on your Artist Controller. As you will know, Eucon does
not appear in the Control Surfaces Setup of Logic, it is just part of Logic Pro 9.
Page 50