Network Connection Examples; Fixed Ip - Direct Connection - Solid State Logic Sigma User Manual

N C
eTwork oNNeCTIoN
1. Fixed IP – Direct Connection
This is the simplest way to setup Sigma with your computer. Sigma comes configured to use a fixed IP on first startup.
Please note that Macintosh computers with multiple Ethernet ports can only use one of those ports at any one time!
If you are using a macintosh computer, you should ensure that Airport is switched off. we
strongly recommend this as Airport is known to cause conflicts with ipmIDI data and may
stop Sigma from working. If you wish to use the internet, we suggest you configure Sigma
with a router/Switch (see example 2).
e
XAmPLeS
DAW
Computer
Page 14
Ethernet
Connection