Logic + Sigma + Nucleus (Or Any Standard Mcu Control Surface); Sigma Browser Settings - Solid State Logic Sigma User Manual

L + S + N ( mCU C S )
oGIC IGmA UCLeUS or ANY STANDArD oNTroL UrFACe
In this example we will configure Sigma to work together with a Nucleus. Logic uses 'Control Surface Groups' so that the
actions of one controller does not affect another. This is useful for us, as setting up 'Control Surface Groups' allows the
banking commands of a control surface to remain separate from the automation streams controlling Sigma. Using this
method, when you press bank on your control surface, the automation streams into Sigma do not follow the banking
command.

Sigma browser Settings

We'll set up Sigma on ipMIDI channels 1 & 2.
1. Go to the SeTTINGS page in the Sigma browser.
2. Set DAw/ProToCoL to LoGIC (mCU) from the drop-down box.
3. Set CHANNeLS 1-8 to ipmIDI Port 1 and set CHANNeLS 9-16 to ipmIDI Port 2 .
4. Disable DAw HANDSHAke (goes grey).
Page 47