Important Safety Instructions - LinMot E1450-PL-QN-0S Installation Manual

E1400 V2 Installation Guide
1

Important Safety Instructions

For your personal safety
Disregarding the following safety measures can lead to severe injury to persons and
damage to material:
Only use the product as directed.
•
Never commission the product in the event of visible damage.
•
Never commission the product before assembly has been completed.
•
Do not carry out any technical changes on the product.
•
Only use the accessories approved for the product.
•
Only use original spare parts from LinMot.
•
•
Observe all regulations for the prevention of accidents, directives and laws applicable on site.
•
Transport, installation, commissioning and maintenance work must only be carried out by qualified
personnel.
• Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or
DIN VDE 0110 and all national regulations for the prevention of accidents.
•
who are familiar with the assembly, installation, commissioning, and operation of the product
and who have the qualifications necessary for their occupation.
Observe all specifications in this documentation.
•
•
specified product features.
•
proposals. It is up to the user to check whether they can be transferred to the particular
applications. NTI AG / LinMot does not accept any liability for the suitability of the procedures
and circuit proposals described.
•
LinMot servo drives and the accessory components can include live and moving parts (depending on
their type of protection) during operation. Surfaces can be hot.
•
installation or operation create the risk of severe injury to persons or damage to material
assets.
•
•
High amounts of energy are produced in the drive. Therefore it is required to wear personal
protective equipment (body protection, headgear, eye protection, hand guard).
Application as directed
Drives are components which are designed for installation in electrical systems or machines. They
•
are not to be used as domestic appliances, but only for industrial purposes according to EN
61000−3−2.
When drives are installed into machines, commissioning (i.e. starting of the operation as directed) is
•
prohibited until it is proven that the machine complies with the regulations of the EC Directive
98/37/EC (Machinery Directive); EN 60204 must be observed.
Commissioning (i.e. starting of the operation as directed) is only allowed when there is compliance
•
with the EMC Directive (2004/108/EC).
•
The technical data and supply conditions can be obtained from the nameplate and the
documentation. They must be strictly observed.
Transport, storage
Please observe the notes on transport, storage, and appropriate handling.
•
Observe the climatic conditions according to the technical data.
•
Page 4/27
According to the basic safety information, qualified, skilled personnel are persons
This is the condition for safe and trouble−free operation and the achievement of the
The procedural notes and circuit details described in this documentation are only
Non−authorized removal of the required cover, inappropriate use, incorrect
For more information, please see the documentation.
www.LinMot.com NTI AG / LinMot ®