Straightening Skewed Images (Skew Correction) - Ricoh R10 User Manual

Straightening Skewed Images
(Skew Correction)
You can straighten rectangular objects, such as a message board
or business card, shot at an angle, to make them look as if they
were shot squarely.
1
Press the 6 (Playback) button.
2
Press the ADJ./OK button !"#$ to display the file you
want to straighten.
3
Press the MENU button.
• The playback menu appears.
3
4
Press the ADJ./OK button " to
select [Skew Correction] and
press the button $.
• The display indicates that the image is
being processed, and then the area
recognized as the correction range is
displayed with an orange frame. Up to
five areas can be recognized.
• If the target area cannot be detected,
an error message appears. The original image remains unchanged.
• To select another correction area, move the orange frame to the target
area by pressing the ADJ./OK button $.
• To cancel skew correction, press the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
5
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
• You can use skew correction for still images shot with this camera.
• You cannot use skew correction for movies or images taken with S-Cont or M-Cont.
• You cannot use skew correction for subfiles with [Sub File Size] set to lower than
[N640[VGA]], when shooting a still image with a subfile with [Record Dual Size] set to
[On]. (GP.101, 165)
134