Appendices Troubleshooting; Error Messages; Appendices - Ricoh R10 User Manual

7 Appendices

Troubleshooting

Error Messages

If an error message is displayed on the screen, take the
corresponding action.
Error Message
Insert Card
Set Date.
File Number Over Limit
Unmatched File
Insufficient Memory. Continue?
Protected
Card Is Write-Protected.
Print settings cannot be set for this
file.
Insufficient Memory/Capacity
Short
Format internal memory
Format card
Card Error
Writing Data
No File
Cannot Record
No files to restore.
Cause and Action
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card. P.179
The camera cannot display this file. Check the file contents
on your computer, and then delete the file.
Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card.
You are trying to delete a protected file.
The card is "Locked (write-protected)". Unlock the card.
This file (movie or other file) cannot be selected for printing. -
Files cannot be stored. Make sure there is enough free
space or delete unwanted files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
You must format the internal memory.
The card is not formatted. Format the card with this camera. P.156
Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The number of remaining shots is 0. Switch to another card
or the internal memory.
There are no files to restore.
Refer to
P.28
P.181
-
P.25
P.136
P.26
P.56
P.156
P.157
P.151
P.157
7
P.156
-
-
P.25
P.144
201