Using Natural And Artificial Lighting (White Balance) - Ricoh R10 User Manual

Using Natural and Artificial Lighting
(White Balance)
Adjust the white balance so that a white subject will appear white.
At purchase, the white balance mode is set to [AUTO]. Normally you
do not need to change the setting, but if the camera is having
difficulty determining the white balance when shooting an object of
a single color or when shooting under multiple light sources, you
can change the setting.
White Balance Modes
Symbol Mode
AUTO Auto
Outdoors
Cloudy
Incandescent
Lamp
Incandescent
Lamp 2
Fluorescent Lamp Select this when shooting under fluorescent light and white
Manual Settings
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see "Using the Menu" (GP.81).
1
Press the ADJ./OK button in shooting mode.
2
Press the ADJ./OK button #$ until the white balance
menu appears.
3
Press the button !" to select a setting other than [M].
• You can also press the shutter release button to take a picture.
Description
Adjusts the white balance automatically.
Select this when shooting outdoors (sunny) and white balance
fails to adjust properly.
Select this when shooting in cloudy weather or shade and the
white balance fails to adjust properly.
Select this when shooting under incandescent light and white
balance fails to adjust properly.
Select this when shooting under incandescent light (more
reddish, compared with [Incandescent Lamp]).
balance fails to adjust properly.
Adjust the white balance manually. (GP.113)
1
111