Using The Camera Shake Correction Function To Prevent Camera Shake (Camera Shake Cor) - Ricoh R10 User Manual

Using the Camera Shake Correction
Function to Prevent Camera Shake
(Camera Shake Cor)
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
1
turned on.
1
Display the shooting menu.
• For information on using the menu, see P.81.
2
Press the ADJ./OK button " to select [Camera Shake
Cor] and press the button $.
3
Press the button !" to select
[On].
4
Press the ADJ./OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available during multi-shot shooting, long
time exposure and movie shooting. If multi-shot shooting or long time exposure is set
while the camera shake correction function is turned on, E changes to F. E
disappears when the mode dial is set to 3.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.34)
106