Displaying An Image Set To [Flag Function Setting] (Flag Function Display); Function Setting - Ricoh R10 User Manual

Displaying an Image Set to [Flag

Function Setting]

(Flag Function Display)
1
Press the 6 (Playback) button.
2
Press the Fn (Function) button,
or select [Flag Function
Display] from the playback
menu, and press the ADJ./OK
button $.
• The file set to [Flag Function Setting]
with the smallest file number is
displayed.
• You can use the zoom lever to change the size of still images. You can
also press the ADJ./OK button !"#$ to move the displayed image.
Changes to the magnification ratio and magnified area are saved, and
the image is displayed as is the next time.
• You can press the shutter release button or the 6 button to switch to
shooting mode.
• If no files are set to [Flag Function Setting], a message appears and
you are returned to the playback menu.
3
Press the Fn button again as required.
• If multiple files are set to [Flag Function Setting], pressing the Fn
button displays the image with the smallest file number.
Note ----------------------------------------------------------------------------------------------
When a file set to [Flag Function Setting] is displayed at normal magnification, pressing
the ADJ./OK button !"#$ displays the previous or next image.
3
125