Ricoh R10 User Manual page 205

Shooting
Problem
The camera does not
shoot even if you press
the shutter release
button.
Unable to view the shot
image.
Images do not appear
on the picture display.
Although the camera is
set to auto focus, it is
unable to focus.
Although the camera is
not in focus, the green
frame appears in the
center of the picture
display.
The picture is blurred.
(The J symbol
appears.)
Cause
Battery is exhausted.
The camera is not on.
The camera is in playback mode.
The shutter release button is not
pressed all the way.
The SD memory card is not
formatted.
The SD memory card is full.
The SD memory card has reached
the end of its useful life.
The flash is charging.
The SD memory card is locked.
The contact surface of the SD
memory card is dirty.
The image confirmation time is too
short.
The camera is not on or the picture
display is dark.
The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable. -
The screen display is in
synchro-monitor mode.
The lens is dirty.
The subject is not in the center of
the shooting range.
It is a hard-to-focus subject.
The camera incorrectly focused
because the distance to the subject
is too close.
You moved the camera when
pressing the shutter release button.
When shooting in a dark place
(such as indoors), the shutter
speed slows down and pictures
become easily blurred.
Solution
Charge the rechargeable battery. P.27
Press the POWER button to turn
the camera on.
Press the 6 (Playback) button
to select the shooting mode.
Press the shutter release button
all the way.
Format the card.
Load a new card, or delete
unwanted files.
Load a new SD memory card.
Wait until the flash mode symbol
stops blinking.
Unlock the card.
Wipe with a soft, dry cloth.
Lengthen the image confirmation
time.
Turn the camera on or adjust the
brightness of the picture display.
Press the DISP. button to change
the display.
Wipe clean with a soft, dry cloth. -
Shoot with focus lock.
Shoot with focus lock or manual
focus.
Shoot with macro mode or move
away from the subject.
Hold the camera with your elbows
pressed against your body.
Use a tripod.
Use the camera shake correction
function.
Use the flash.
Raise the ISO setting.
Use the camera shake correction
function.
Refer to
P.30
P.52
P.35
P.156
P.28
P.56
P.28
P.41
P.26
-
P.168
P.30
P.158
P.60
P.35
7
P.35
P.86
P.39
P.33
P.106
P.41
P.114
P.106
203