Correcting Skewed Images - Ricoh GR Instruction Manual

Correcting Skewed Images

Correct images of rectangular objects such as message boards and business
cards shot at an angle so that the images appear as if they were shot from
the front.
1
Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2
Select [Skew Correct Mode] and then press the $ button.
A message appears to indicate processing is being performed, and then up
to five areas recognized as correction targets are indicated by orange frames.
If an area could not be detected, an error message appears.
3
Use the #$ buttons to select a
correction area.
To cancel correction, press the r button.
4
Press the MENU/OK button.
Screw correction is performed for the selected area and then the portions
outside the frame are trimmed.
Note -----------------------------------------------------------------------------------------------------------
• The time for skew correction increases with image size.
2
89