Ricoh R10 User Manual page 152

7
Press the ADJ./OK button !"
to select an item, and then
press the button $ to display
the detailed options screen.
• When [Connecting...] is displayed, the
connection to the printer is not yet
established. When a connection is
established, [Connecting...]
disappears and [Direct Print] appears.
Proceed with this step after the connection is established.
• The following items can be selected. Each item is available only when
supported by the printer connected to the camera.
Item Name
Paper Size
Paper Type
Layout
4
Date Print
File Name Print
Optimize Image
Print Size
Print Quality
(*)
Report Print
Printing Quantity
Toner Saving
1-Side/2-Sides
(*)
Each item is available only when supported by the Ricoh printer connected
to the camera.
8
Press the ADJ./OK button !" to select the setting, and
then press the ADJ./OK button.
• The display returns to the Direct Print menu.
9
Repeat Steps 7 and 8 to change other settings as
required.
150
Description
Sets the paper size.
Sets the paper type.
Sets the number of images printed on a sheet of paper. The number
of images that can be laid out on a sheet of paper varies depending
on the connected printer.
Selects whether to print the date (shooting date). The date format can
be set using the date/time option in the setup menu.
Selects whether to print the file name.
Selects whether to optimize the image data (still image) prior to
printing on the printer.
Sets the print image size.
Sets the print quality.
Prints on forms.
Sets the print quantity.
(*)
Selects whether to conserve toner by using less ink during printing.
(*)
Selects whether to print on both sides of the paper. During duplex
printing, one copy is printed for each still image. Only one copy is
printed even if you selected more than one copy to print in Step 6 on
P.151.