Registering Custom Settings (Reg. My Settings) - Ricoh R10 User Manual

Registering Custom Settings
(Reg. My Settings)
The My Settings function allows you to easily shoot with your
desired settings.
You can register two groups of settings as "My Settings". Setting the
mode dial to MY1 allows you to shoot with the settings registered in
[MY1]. Setting the mode dial to MY2 allows you to shoot with the
settings registered in [MY2]. (GP.44)
To register the current camera settings as My Settings, follow the
steps below.
1
Change the camera settings to the settings to be
registered as My Settings.
2
Display the setup menu.
• For the operating procedure, see P.154.
3
Press the ADJ./OK button " to
select [Reg. My Settings] and
press the button $.
• A confirmation message appears.
4
Press the button #$ to select
[MY1] or [MY2] and press the
ADJ./OK button.
• The current camera settings are registered and the display returns to
the setup menu.
• If you do not want to register them, press the DISP. button.
5
Press the MENU button or the ADJ./OK button.
5
159