Using The Self-Timer - Ricoh R10 User Manual

t Using the Self-Timer
You can set the self-timer to shoot after either two or ten seconds,
or you can select [Custom] to customize the self-timer setting.
With [Custom], you can take a set number of pictures at a set
interval. Use [Custom Self-Timer] on the shooting menu to set the
shooting interval and number of pictures for [Custom]. (GP.102)
1
With the camera ready to
shoot, press the t (Self-
timer) button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera shoots after 10 seconds.
• Each time you press the t button, the setting changes in the
following order: 10 sec, 2 sec, Custom, and Self-timer Off.
2
Press the shutter release button.
• When set to [10], the AF auxiliary light/self-timer lamp lights for
8 seconds when the self-timer starts and then blinks for the final
2 seconds before the picture is taken.
• When set to [Custom], the AF auxiliary light/self-timer lamp
blinks for 2 seconds before each picture is taken, and pictures
are taken at the set shooting interval. The focus position is set
for the first shot.
• When set to [Custom], press the MENU button to cancel the self-
timer during shooting.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t button and change the self-timer setting to [Self-Timer Off].
• When the AF auxiliary light/self-timer is set to 2 seconds, the self-timer lamp does
not light or blink.
• You can only select [10] in easy shooting mode. Pressing the t button switches
between 10 sec and Self-timer Off.
• When the self-timer is set, the [Interval] setting is disabled.
51