Beep Sound Setting; Auto Power Off Setting - Ricoh Camera RDC-i700 Operation Manual

Beep Sound Setting

The camera beeps to alert you when it records a picture. You can enable and
disable the beep by the following steps.
A Set the mode dial to [
B Select [BEEP SOUND] and then select
[OK].
C Select [ON] or [OFF] and then select
[OK].
Select [OFF] to disable the beep.
• The error beep is not disabled even when the beep sound is set on
Note
[OFF].

Auto Power Off Setting

The camera will turn off automatically (auto power off) in the recording and play
modes to conserve the battery if it is left idle (no buttons or switches operated)
for a preset length of time. The time until the auto power off function is activated
can be set from 0 – 60 minutes.
Setting
CAMERA POWER
LCD MONITOR
].
Sets the time until the camera turns off automatically if
no operation is performed. The factory default setting is
5 minutes in recording and play modes.
Sets the time until the LCD monitor turns off
automatically if no operation is performed. The factory
default setting is 2 minutes in recording and play
modes.
Explanation
5
117