Changing The Iso Sensitivity - Ricoh Camera RDC-i700 Operation Manual

Changing the ISO Sensitivity

You can change the ISO sensitivity.
A Set the mode dial to [
and press the MENU button.
B Select [ISO SENSITIVITY].
C Select the ISO sensitivity (AUTO, ISO
200 or ISO 400) and then select [OK].
D Select [EXIT] to exit the menu display.
The ISO sensitivity will be displayed on the
LCD monitor.
E Press the shutter release button to
take the picture.
• Enable the keep settings mode to save the ISO sensitivity setting.
Note
P.116 "Keep Settings"
72
·
ISO sensitivity display
when the DISPLAY button
is pressed. (Information
display P.49)
· · ]