Fine Adjustment Of The Lcd Monitor And Touch Screen - Ricoh Camera RDC-i700 Operation Manual

LCD Monitor
When using the stylus pen, set the LCD monitor as shown below.
A Rotate the LCD monitor as illustrated.
Do not rotate beyond the limits of the angle
shown.
B Open the LCD monitor
perpendicularly, rotate it at an angle
of 180 degrees in the direction of the
arrow and close it.
Fine Adjustment of the LCD Monitor and Touch
Screen
You can use the stylus pen supplied with the camera to select and set items. If
the touch screen does not function properly, use the fine adjustment function to
adjust the LCD monitor and touch screen.
A Set the mode dial to [
• P.24 "Turning On/Off the Camera"
See
• P.25 "How to Use the Mode Dial"
].
2
29