Changing The Beep Sound Setting (Beep Sound) - Ricoh Caplio RZ1 User Manual

Changing the Beep Sound Setting
(BEEP SOUND)
When a shot image is recorded in the internal memory or an SD
memory card, the camera will issue a short beep to indicate a picture
has been taken. You can mute the beep sound
Possible Settings
ON (all sounds on) *Initial setting at purchase
OFF (all sounds off)
To change the setting of operation sound, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.89.
2.
Press the !"
[BEEP SOUND] and press the O
or $ $ $ $ button.
3.
Press the !"
the desired setting.
4.
Press the O
5.
If you pressed the # # # # button in step
4, press also the M
This setting will be used until you change it.
94
!" button to select
!" !"
!" buttons to select
!" !"
O or # # # # button.
O O
M button.
M M
O
O O