Ricoh Camera RDC-i700 Operation Manual page 133

Problem
Autofocus is on Dirty lens or AF viewfinder
but camera not
Subject not in center of shooting
focusing
scope
Subject difficult to focus on
Distance to subject is too close
Flash will not Recording mode set on
fire or will not Memo),
charge Shooting) or
Flash mode set on
Camera set on macro mode
White balance set to mode other
than auto
Battery exhausted
Image dark Distance to subject more than
even with flash approx. 2.5 m
Subject is too close
Image is too
bright Overexposed
Contrast setting not correctly
adjusted
Shot in low light with flash set to
Image is too
dark (flash off)
Underexposed
Brightness setting not correctly
adjusted
Unnatural Shooting conditions difficult for auto
coloration of white balance mode
image
Screen display set to [OFF]
Date and other
recording data
not displayed
Camera not set to
No playback or
image will not
Incorrect playback source
appear
CF card or PC card not inserted, or
inserted card does not contain any
files
Card not formatted with this camera
Card contains incorrectly recorded
files
Card contains files in format not
supported by this camera
AV interface cable not properly
connected
Source of interference, such as
electric motor, nearby
CF card or PC card contact surface
dirty
Playback is not Error in internal memory of camera
clear
Error in CF card or PC card
Cause
(Voice
(Text), (Continuous
(Motion Picture)
(flash off)
(Play) mode
Remedy
Clean lens or viewfinder.
Use focus lock.
Use focus lock or switch to manual focus.
Set macro mode.
Set mode dial to (Still Picture) or
(Text) mode.
Press button to cancel flash off mode.
Press button to cancel macro mode.
Press WB button to switch white balance to
auto mode.
Charge battery.
Move closer to subject.
Set flash to flash off mode.
Adjust exposure compensation from
recording menu. Set time exposure mode
to OFF.
Press LCD contrast adjustment buttons to
adjust contrast of LCD monitor.
Press button to cancel flash off mode.
Press button to adjust exposure
compensation.
Press LCD Contrast Adjustment button to
adjust contrast of LCD monitor.
Place a white object near subject, use
flash, or select manual white balance
mode.
Press DISPLAY button to switch display
mode.
Set mode dial to (Play).
Press button to change playback
source. Switch to another folder containing
files.
Insert card containing recorded images.
Use card that has been formatted and
recorded with this camera.
Insert card containing properly recorded
images.
Check format type.
Connect properly.
Move camera away from source of
interference.
Clean with soft, dry cloth.
Copy required files from internal memory
onto CF card or PC card and format
internal memory.
Test camera with another card. If second
card displays well, problem is with card not
camera. Do not use this card.
Page
–
P.57
P.57
P.69
P.69
P.49
P.58
P.62
P.69
P.66
P.15
P.62
P.62
P.64
P.79
P.28
P.62
P.64
P.28
P.66
P.49
P.87
P.84
P.84
P.100
P.20
P.43
P.20
P.84
P.88
–
–
P.43
P.92
–
131