Date Imprinting - Ricoh Camera RDC-i700 Operation Manual

Date Imprinting

Use this function to record images imprinted with the date.
• If the date has not been set in the Setup menu, this function is not
Note
available. Set the date. The date is displayed in the format selected
with the DATE SETTING option in the Setup menu.
the Date and Time"
A Set the mode dial to one of the
following: [
MENU button.
B Select [DATE IMPRINT].
C Select the date type (DATE, DATE +
TIME, or TIME) and then select [OK].
Example
The format for the date (2000/09/15/10:15) is
displayed as shown below. If you have
chosen
• [DATE] ................ 2000/09/15 (yyyy/mm/dd)
• [DATE + TIME] ... 2000/09/15 10:15 (yyyy/
• [TIME]. ............... 10:15 (hh:mm)
• To cancel the date imprint mode,
Note
select [OFF].
D Select [EXIT] to exit the menu display.
E Press the shutter release button to
take the picture.
• Enable the keep settings mode to save the date imprint mode setting.
Note
P.116 "Keep Settings"
, or ] and press the
mm/dd/hh:mm)
P.39 "Setting
3
71