Changing The Beep Sound Setting (Beep Sound) - Ricoh Caplio R1 User Manual

Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
Start sound
Shutter release sound
Focus sound
Beep Sound
You can change the setting to mute these operation sounds.
Possible Settings
Shutter release sound (Shutter release sound, Beep Sound)
ON (all sounds on) *Initial setting at purchase
OFF (all sounds off)
To change the setting of operation sound, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the !"
[BEEP SOUND] and press the O
or $ $ $ $ button.
3.
Press the !"
the desired setting.
4.
Press the O
5.
If you pressed the # # # # button in step
4, press also the M
This setting will be used until you change it.
100
: Sound when the camera power is turned on.
: Sound when the shutter button is pressed.
: When the focus is set, the camera generates the focus sound.
: If an impossible operation is attempted, the camera generates the beep
sound.
!" button to select
!" !"
!" buttons to select
!" !"
O or # # # # button. O O
M button.
M M
O
O O