Table of Contents
Advertisement
Messages/Second messages
Reset Toner Cyan
Reset Toner Magenta
Reset Toner Yellow
Reset Transfer Unit Correctly
Reset Tray 1 Correctly
Reset Tray Correctly
Reset Waste Toner Correctly
Reset Yellow Toner Correctly
RPCS Graphic Error
RPCS Memory Overflow
RPCS Syntax Error
Error & Status Messages on the Control Panel
Description
The indicated toner cartridge
is not set correctly.
The indicated toner cartridge
is not set correctly.
The indicated toner cartridge
is not set correctly.
The transfer unit is not set cor-
rectly, or is not set.
The indicated paper input
tray is not set correctly, or is
not set.
The printer detected, when
processing a job through Auto
Tray Select, that any of paper
input tray is not set correctly,
or is not set.
The waste toner bottle is not
set correctly, or is not set.
The toner cartridge (Y) is not
set correctly or is not set, and
the color printing is non-ap-
plicable.
The graphic is not initialized
because the graphic memory
was not reserved.
The printer memory is not ini-
tialized because the CDC
memory was not reserved via
the system call.
The printer identified a syntax
error. This error results from;
data transmogrification
caused by the transmission
path problem, data interrup-
tion, data transmission from
other drivers, etc.
Solution
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Contact your sales or service
representative.
Set the indicated paper input
tray correctly.
Set the indicated paper input
tray correctly.
Set the waste toner bottle cor-
rectly.
Set the toner cartridge (Y) cor-
rectly.
See "Setting Up" in the Setup
Guide.
Replace the installed memory.
Replace the installed memory.
Be sure to use the correct driv-
er.
4
79
Advertisement
Table of Contents
