Table of Contents
Advertisement
Replacing Consumables and Maintenance Kit
The following message appears on
the panel display, and the printer
starts color registration adjustment
automatically. Please wait for a
while.
1
Calibrating...
After finishing adjustment, the fol-
lowing message appears.
Initializing...
Please Wait
S S S S
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then press { { { { Enter} } } } .
Press # for
Fuser Adjust
T T T T
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then load the A3 paper
which comes with the Fusing
Unit in the Bypass Tray.
Set Sheet in
Bypass, then #
A Open the Bypass Tray.
22
B Pull out the Bypass Tray Exten-
sion, and then flip it open.
C Slide the side guides outward
(A A A A ), and then load paper until
it stops (B B B B ).
D Adjust the side guides to the
paper width.
Important
❒ Be sure to shuffle the paper
before loading the stack onto
ZDJH202J
the tray so multiple sheets
are not fed in at one time.
ZDJH203J
ZDJH204J
ZDJH205J
Advertisement
Table of Contents
