Ricoh Aficio AP3800C Maintenance Manual page 84

Ricoh dehumidifier operating instructions ap3800c
Hide thumbs Also See for Aficio AP3800C:
Table of Contents

Advertisement

Troubleshooting
Messages/Second messages
HDD Full
HDD Not Installed
I/O Buffer Overflow
4
Invalid Password Try Again
Load Correct Size Paper
/Press # To Continue
Load Paper Tray #
Load Paper
/Paper Size: Paper Type:
Menu Protected Cannot
Change
No Files Exist
74
Description
The maximum HDD area size
for form/font has been ex-
ceeded.
An HDD overflow error oc-
curred during Sample Print or
Lacked Print.
The user tries to print the
Lacked Print data without
HDD installed.
The maximum size of the I/O
buffer has been exceeded.
The entered password with
the control panel is not cor-
rect.
The paper size setting in the
tray differs from that of actual
paper size in the tray.
The indicated tray is out of pa-
per. #: tray number
1:The printer received a re-
quest for a paper type, or pa-
per size not available in the
printer, and Tray Locking is
not applicable.
2:The paper type and size
loaded in the tray which the
printer searched using Tray
Locking is Invalid for Duplex
Print.
The menu is protected and the
setting cannot be changed.
There are no files available for
Sample Print job or Locked
Print job.
Solution
Delete the disused form /font
types.
Delete the stored files or re-
duce the size of the Sample
Print file or Lacked Print file.
If you use the Locked Print
feature, make sure to install
HDD. If the error continues,
contact your sales or service
representative.
Increase the size of the I/O
buffer through the I/F Setup.
Enter the correct password
with the control panel.
Load {paper size} paper with
the selected feed direction into
the tray, and then change the
paper size with the control
panel.
Or press { { { { Form Feed} } } } , and se-
lect the tray with the opera-
tional panel.
Or press { { { { Job Reset} } } } to cancel
the print job.
Load paper into the indicated
paper tray.
Change the setting of the indi-
cated paper input tray, or
press { { { { Job Reset} } } } . Form Feed
is not applicable here.
Wait for two seconds until the
previous display appears.
Wait for two seconds until the
previous display appears.

Advertisement

Table of Contents
loading

Table of Contents