Table of Contents
Advertisement
❖ ❖ ❖ ❖ Envelopes
Important
❒ Only envelopes A and B as shown below are supported.
Misfeeds also might occur when using envelopes A and B depending on the
*1
length and shape of the flaps.
• When printing on envelopes, use the bypass tray, and select "Thick Paper"
as a paper type in the "Paper Input" menu on the control panel.
⇒ p.67 "Specifying a paper type for the Bypass Tray"
• Specifications of envelopes are as follows:
Weight
Recommended weight
and size
• You can load up to 10 envelopes (72 - 92 g/m
at the same time, without forcibly pressing them. Confirm that the enve-
lopes are not damp, and that the top of the stack is not higher than the limit
mark on the side guide.
• Confirm that the print side is facing up when loading onto the Bypass
Tray.
• When loading envelopes, be sure to unfold the flaps and position them op-
posite to the paper feed direction.
Supported
Supported
Not supported
Metric version
2
72 - 90 g/m
, 114 × 162 mm
2
72 g/m
(C6 Env)
Paper Recommendations
*1
*1
Inch version
19 - 24 lb
" × 7
7
24 lb, 3
/
8
(Monarch)
2
, 19 - 24 lb) in the Bypass Tray
3
1
/
"
2
55
Advertisement
Table of Contents
