Table of Contents
Advertisement
Troubleshooting
Messages/Second messages
Replace Waste Toner (Type E) It is time to replace the waste
Reset Cyan Toner Correctly
Reset Develop. Unit Correctly
/Yellow/Magenta Cy-
4
an/Black
Reset Duplex Unit Correctly
Reset Finisher Correctly
Reset Fuser Oil Unit Correctly The fuser oil unit is not set cor-
Reset Fusing Unit Correctly
Reset Magenta Toner Correct-
ly
Reset PCU Correctly
/Yellow/Magenta Cy-
an/Black
Reset Toner Black
78
Description
toner.
The toner cartridge (C) is not
set correctly or is not set, and
the color printing is non-ap-
plicable.
The indicated development
unit(s) is/are not set correctly,
or is not set.
The duplex paper feed unit is
not set correctly or is not set.
Finisher is not set correctly, or
is not set.
rectly, or is not set.
There is no fusing unit, or the
fusing unit is not installed cor-
rectly.
The toner cartridge (M) is not
set correctly or is not set, and
the color printing is non-ap-
plicable.
The indicated Photoconductor
Unit(s) is/are not set correct-
ly, or is not set.
The indicated toner cartridge
is not set correctly.
Solution
Replace a waste toner bottle.
Depending on your service
contract, contact your sales or
service representative.
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
Set the toner cartridge (C) cor-
rectly.
See "Setting Up" in the Setup
Guide.
Set the indicated development
unit(s) correctly. See p.1 "Re-
placing Consumables and
Maintenance Kit".
Remove and re-install the du-
plex paper feed unit. If the er-
ror continues, contact your
sales or service representative.
See "Setting Up" in the Setup
Guide.
Set the finisher correctly.
See "Setting Up" in the Setup
Guide.
Set the fuse oil unit correctly.
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
Set the fusing unit correctly.
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
Set the toner cartridge (M)
correctly.
See "Setting Up" in the Setup
Guide.
Set the indicated Photocon-
ductor Unit(s) correctly.
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Advertisement
Table of Contents
