Table of Contents
Advertisement
When color shifting occurs
Perform this procedure when color
shifting occurs even after performing
"Auto Adjust".
A A A A
L
L or larger paper in the
L
Load A4L
Bypass Tray.
Note
❒ Be sure to select paper size in
the "Paper Input" menu.
Reference
For details about paper size and
the procedure for loading paper
in the Bypass Tray, see p.64
"Load Paper in the Bypass
Tray".
B B B B
Press { { { { Menu} } } } .
"Menu" appears on the panel dis-
play.
C C C C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter} } } } .
Menu:
Maintenance
The maintenance menu is dis-
played.
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Color
Regist.", and then press { { { { Enter} } } } .
Maintenance:
Color Regist.
E E E E
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Fuser
Adjust", and then press { { { { Enter} } } } .
Color Regist.:
Fuser Adjust
Important
❒ When the toner cartridge is al-
most empty, or Auto Adjust is
not finished, the following mes-
sage appears on the panel dis-
play and "Fuser Adjust" is not
available.
Cannot Adjust
See User's Guide
Confirm that the toner cartridge is
installed. The toner cartridge must
be installed. See p.3 "Replacing the
Toner Cartridge".
If the toner cartridge is installed,
perform "Auto Adjust".
ZDJS001J
F F F F
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Cus-
tom Adjust", and then press { { { { En-
ter} } } } .
The following message appears on
the panel display.
Fuser Adjust:
Custom Adjust
Adjusting the Color Registration
2
37
Advertisement
Table of Contents
