Table of Contents
Advertisement
Replacing Consumables and Maintenance Kit
C Lift and hold the green handle
at the top (A A A A ), and pull out the
unit slowly (B B B B ).
1
H H H H
Install a new Photoconductor
Unit.
For black, install one, and for color,
install three.
A Take the unit out from the bag.
Important
❒ Do not remove the cover that
is attached to the bottom of
the Photoconductor Unit at
this time.
12
B Place the Photoconductor Unit,
and remove the adhesive tape
at the tip of the unit.
ZDJH210J
C Match the green arrow at the
tip of the Photoconductor Unit
to the rail inside the printer.
Important
❒ Make sure the green arrow
ZDJH221J
fits securely on the rail before
proceeding to the next step.
D Push the front of the Photocon-
ductor Unit slowly, slide the
unit on the cover, and push in
until it stops.
ZDJH222J
ZDJH223J
ZDJH224J
Advertisement
Table of Contents
