Table of Contents
Advertisement
Messages/Second messages
Close Right Cover
Close Upper Left Cover
Driver Setting Error (Memo-
ry)
Duplex Cancelled
Error:Tray 1 Reset The Job
/Then Power OffOn
Error:Tray 1 Form Feed
/Or Job Reset Then Power Of-
fOn
Exceeded Max. Pages (Col-
late)
Exceeded Max. Stored Files
Exceeded Max. Stored Pages
Hardware Problem DIMM
Hardware Problem Ethernet
Error & Status Messages on the Control Panel
Description
The right cover is open.
The upper left cover (the cov-
er for the fusing unit) is open.
The printer identified a down-
load error. This error may oc-
cur when the installed
memory amount is less than
the driver setting.
The setting of Duplex Print
has been cancelled.
There is a problem with the
current specified tray. The job
can not be processed.
The printer identified the fail-
ure of the indicated paper
tray. The job is not printed.
The printer identified a colla-
tion page overflow error.
The maximum number of
stored files has been exceeded
during Sample Print of
Lacked Print.
The maximum number of
pages has been exceeded dur-
ing Sample Print of Lacked
Print
The printer identified a DIMM
sum value error.
The printer identified an Eth-
ernet error.
Solution
Close the right cover.
Close the upper left cover.
Verify that the paper memory
size is specified with the driv-
er setting.
(a) To print the image correct-
ly, add memory to the printer.
(b) Be sure to use the correct
paper.
Reset the job then turn the
printer Off, and then back On.
Apply Form Feed from other
tray or cancel the job, and then
switch your printer Off then
back On. If the error contin-
ues, contact your sales or serv-
ice representative.
Increase the RAM capacity.
Install the optional hard disk
drive.
Delete the stored files.
Reduce the number of pages
to print.
Remove and re-install the
DIMM correctly.
Remove any dust under the
DIMM.
If the message appears again,
contact your sales or service
representative.
See "Setting Up" in the Setup
Guide.
Turn the power switch off and
then on. If the message ap-
pears again, contact your sales
or service representative.
4
71
Advertisement
Table of Contents
