Table of Contents
Advertisement
Troubleshooting
Messages/Second messages
Remove MisfeedY: Paper
Tray
/See Instructions in Front
Cover
Remove Misfeed: Duplex Unit
/See Instructions in Front
Cover
Remove Misfeed: Dup.Feed
4
Unit
/See Instructions in Front
Cover
Remove Paper All Output
Trays
Remove Paper Finisher Tray # The indicated finisher shift
Remove Paper From Upper
Tray
Remove Paper Inside Finisher There is still paper in the fin-
Remove Paper Inside Finisher A communication error is sent
Remove Paper Mailbox Tray # The output tray # of the op-
Remove Paper Standard Tray
Replace Black Dev.
Unit(TypeD)
76
Description
There is a misfeed in the spec-
ified input tray, or the printer
is not feeding paper.
There is a misfeed in the du-
plex unit.
There is a misfeed in the du-
plex feed unit.
All output trays are full.
tray is full. #:finisher shift tray
number
The upper tray (output 1-bin
tray)is full.
isher.
from the system unit to the
duplex unit.
tional 4-bin Mailbox is full.
#:mailbox tray number
The standard output tray is
full
It is time to replace the black
development unit.
Solution
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
For more information, see
p.96 "When "Remove Misfeed
Y: Paper Tray" Appears".
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
For more information, see
p.96 "When "Remove Misfeed
:Duplex Unit " Appears".
Remove the misfed paper.
See p.89 "Removing Misfed
Paper in the Duplex Feed
Unit".
Remove paper from all output
trays.
Remove the paper from the in-
dicated finisher shift tray.
Remove paper from the upper
tray.
Open the cover for the finisher
and remove paper.
See p.94 "When "Remove Mis-
feed R: Finisher" Appears".
Remove and re-install the du-
plex unit. If the problem con-
tinues, contact your sales or
service representative.
Remove paper from the indi-
cated 4-bin Mailbox tray.
Remove paper from standard
output trays.
Replace a new black develop-
ment unit.
Depending on your service
contract, contact your sales or
service representative.
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
Advertisement
Table of Contents
