Supported Pre5 Wan Slot Configurations; Upgrading To Cisco 10000 Series Spa Interface Processor-600; Sip; Cisco Wideband Sip - Cisco uBR10012 Hardware Installation Manual

Overview of SPA Interface Processors
Slots
3 and 4

Supported PRE5 WAN Slot Configurations

The Cisco 3 Gbps Wideband Shared Port Adapter, Cisco 6 Gbps Wideband Shared Port Adapter, and
Cisco Wideband SPA can coexist in a Cisco uBR10012 router having Cisco 10000 Series SPA Interface
Processor-600 and PRE5. You may choose to have any combination using the Cisco 3 Gbps Wideband Shared
Port Adapter, Cisco 6 Gbps Wideband Shared Port Adapter, and Cisco Wideband SPA cards with Cisco 10000
Series SPA Interface Processor-600 and PRE5. That is, you can install three Cisco 3 Gbps Wideband Shared
Port Adapter cards or Cisco 6 Gbps Wideband Shared Port Adapter, and one Cisco Wideband SPA card, or
two Cisco 3 Gbps Wideband Shared Port Adapter or Cisco 6 Gbps Wideband Shared Port Adapter cards and
two Cisco Wideband SPA cards.

Upgrading to Cisco 10000 Series SPA Interface Processor-600

An automated upgrade from the Cisco Wideband SIP to the Cisco 10000 Series SPA Interface Processor-600
is not supported in Cisco IOS Release 12.2(33)SCB. This section explains how to perform a manual upgrade
from the Cisco Wideband SIP to the Cisco 10000 Series SPA Interface Processor-600.
To perform the upgrade, follow these steps:
Procedure
Step 1 Load the Cisco IOS Release 12.2(33)SCB image or later on a Cisco uBR10012 router.
Note
Step 2 Copy the running configuration file to the flash drive or the TFTP server.

SIP

Cisco 10000 Series SPA
Interface Processor-600
Skip this step if the PRE2 or PRE4 is already running Cisco IOS Release 12.2(33)SCB or later.
Both the configuration and CLI commands in Cisco IOS Release 12.2(33)SCB use a new indexing
method. When a Cisco IOS Release 12.2(33)SCB or a later image is installed on the PRE, the PRE
converts the Cisco Wideband SIP configuration commands to use the new indexing method. For
more information on the new indexing method, see
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
Supported PRE5 WAN Slot Configurations
SPAs Maximum Cards
Supported
Up to three
• Cisco 1-Port
Cisco Wideband SPAs.
10-Gigabit Ethernet
SPA
• Cisco Wideband
SPA
• Cisco Wideband
SPA (optional)
• Cisco Wideband
SPA (optional)
SIP and SPA Slot Numbering Format.
27