Cisco 6 Gbps Wideband Shared Port Adapter Leds - Cisco uBR10012 Hardware Installation Manual

Cisco 6 Gbps Wideband Shared Port Adapter LEDs

For annex A and 256 QAM, each Cisco 6 Gbps Wideband Shared Port Adapter in the 10G mode supports
Note
up to 20 RF channels with fully loaded traffic per Gigabit Ethernet port and hence a total of 120 RF
channels per Cisco 6 Gbps Wideband Shared Port Adapter card. If the RF channels do not run with fully
loaded traffic, 144 RF channels can be configured on the 10G port.
For license information, see the
Note
Cisco 6 Gbps Wideband Shared Port Adapter LEDs
The Cisco 6 Gbps Wideband Shared Port Adapter has three LEDs: an A/L LED for each individual SFP+
port, a STATUS LED for the SPA, and a LICENSE LED for indicating the license of the SPA.
Figure 12: Cisco 6 Gbps Wideband Shared Port Adapter Faceplate
1
2
Table 44: Cisco 6 Gbps Wideband Shared Port Adapter LEDs
LED Label
A/L
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
52
Software License Activation on Cisco CMTS Routers
A/L (Active/Link) LEDs
STATUS LED
Color
Off
Solid Amber
Solid Green
Flashing Green
3 LICENSE LED
—
State Meaning
Off Optical module is not present.
On Optical module is present.
On The port is enabled and the link is up.
On Traffic is flowing through the optical links.
Overview of Shared Port Adapters
document.