Related Documentation
Chapter
Preparing to Install a SIP or a
SPA
Installing and Removing a SPA
Interface Processor
Installing and Removing a Shared
Port Adapter
Verifying and Troubleshooting
SIPs and SPAs
Related Documentation
•
•
•
•
•
•
•
•
•
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service
request, and gathering additional information, see What's New in Cisco Product Documentation, at:
www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical
documentation as an RSS feed and delivers content directly to your desktop using a reader application. The
RSS feeds are a free service.
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
viii
Cisco uBR10012 Universal Broadband Router SIP and SPA Software Configuration Guide
Cisco uBR10012 Universal Broadband Router Documentation Roadmap
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Regulatory Compliance and Safety Information for the Cisco uBR10012 Universal Broadband Router
Cisco Cable Wideband Solution Design and Implementation Guide, Release 1.0
Release Notes for Cisco Universal Broadband Routers in Cisco IOS Release 12.2SC
Cisco IOS CMTS Cable Command Reference
Cisco IOS CMTS Cable System Messages Guide
Cisco CMTS Universal Broadband Router MIB Specifications Guide
Description
Explains the general equipment, safety, and site preparation requirements
for installing SIPs and SPAs.
Describes how to install or remove SIPs on the Cisco uBR10012 router.
Explains how to install or remove SPAs on the Cisco uBR10012 router.
Describes how to verify and troubleshoot the installation of SIPs and
SPAs on the Cisco uBR10012 router.
Preface
http://