Sfp+ Module Cabling And Connection Equipment; Cisco 6 Gbps Wideband Shared Port Adapter Overview - Cisco uBR10012 Hardware Installation Manual

Universal broadband router sip and spa

Hide thumbs Also See for uBR10012:

Table of Contents

Overview of Shared Port Adapters

SFP+ Module Cabling and Connection Equipment

See the

The Cisco 6 Gbps Wideband Shared Port Adapter is a single-wide, half-height shared port adapter that provides

DOCSIS network formatting to downstream data packets. It is used for only downstream data traffic. The

Cisco 6 Gbps Wideband Shared Port Adapter is a key component for the Cisco IOS features, DOCSIS 3.0

Downstream Channel Bonding and DOCSIS M-CMTS network architecture. The base hostboard is the

Cisco 10000 Series SPA Interface Processor-600. Each Cisco 10000 Series SPA Interface Processor-600

jacket can host four Cisco 6 Gbps Wideband Shared Port Adapter cards. The Cisco 6 Gbps Wideband Shared

Port Adapter has six controllers. The Cisco 6 Gbps Wideband Shared Port Adapter supports only the 10G

mode.

In the Cisco IOS Release 12.2(33)SCI, the Cisco 6 Gbps Wideband Shared Port Adapter uses the same

Note

hardware as the Cisco 3 Gbps Wideband Shared Port Adapter. Upgrade the software on the

field-programmable device (FPD) to the Cisco 3 Gbps Wideband Shared Port Adapter to configure it as

a Cisco 6 Gbps Wideband Shared Port Adapter.

Each Cisco 6 Gbps Wideband Shared Port Adapter has three Gigabit Ethernet ports (no redundant port). The

first two Gigabit Ethernet ports on the SPA can be used as a 10 Gigabit Ethernet port (one active and one

redundant). The Gigabit Ethernet ports are used to send traffic to one or more external edge QAM devices.

The last Gigabit Ethernet port (1G port) cannot be used on the Cisco 6 Gbps Wideband Shared Port Adapter

Note

as it does not support the 10G mode.

Figure 11: Cisco 6 Gbps Wideband Shared Port Adapter Faceplate

The Cisco uBR10012 router can support up to two Cisco 10000 Series SPA Interface Processor-600 jackets

and eight Cisco 6 Gbps Wideband Shared Port Adapters. Each Cisco 6 Gbps Wideband Shared Port Adapter

card supports up to 144 RF channels and hence a total of 1152 RF channels are supported with eight

Cisco 6 Gbps Wideband Shared Port Adapters with some level of oversubscription.

Cisco 10GBASE SFP+ Modules Data

Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide

Sheet.

Table of Contents