If You Cannot Make Clear Copies - Ricoh Aficio 220 Copy Reference Manual

If You Cannot Make Clear Copies

Problem
Copies appear dirty.
The reverse side of an
original image is cop-
ied.
A shadow appears on
copies if you use the
pasted originals.
The same copy area is
dirty whenever mak-
ing copies.
Copies are too light.
Parts of the image are
not copied.
Copies are blank.
A moire pattern is
produced on copies.
R
Cause
The image density is too dark. Adjust the image density.
Auto Image Density is not se-
lected.
The image density is too dark. Adjust the image density.
Auto Image Density is not se-
lected.
The image density is too dark. Adjust the image density.
The exposure glass, platen
cover, or document feeder
white sheet is dirty.
The image density is too light. Adjust the image density.
Damp or rough grain paper is
used.
Toner cartridge is almost
empty.
The original is not set correct-
ly.
An improper paper size is se-
lected.
The original is not set correct-
ly.
Your original has a dot pat-
tern image or many lines.
If You Cannot Make Clear Copies
Action
P.30 "Adjusting Copy Image
Density".
Select Auto Image Density.
P.30 "Adjusting Copy Image
Density".
Select Auto Image Density.
P.30 "Adjusting Copy Image
Density".
Change the direction of the
original.
Put mending tape on the past-
ed part.
Clean them. P.132 "Main-
taining Your Machine".
P.30 "Adjusting Copy Image
Density".
Use dry paper without rough
grain.
Add toner. P.91 "D Chang-
ing the Toner Bottle".
Set originals correctly.
"Setting Originals".
Select the proper paper size.
Set originals correctly.
"Setting Originals".
Change the original direction.
3
P.27
P.27
85