Changing The Paper Size; Changing The Paper Size In Tray 1 Or The Optional Paper Table - Ricoh Aficio 220 Copy Reference Manual

Changing the Paper Size

Preparation
Two procedures for changing the
paper size are given below. The
first is for changing the paper size
in tray 1 or the optional paper ta-
ble, the second for changing the
paper size in tray 2. Please check
you are following the appropriate
procedure before you start.
Important
Be sure to select the paper size
with the user tools. Otherwise,
misfeeds might occur.
If you want to change the Large
Capacity Tray's paper size, contact
your service representative.
Reference
For paper sizes, weight, and capac-
ity that can be set in each tray, see
P.19 "Copy Paper".
Changing the Paper Size in
Tray 1 or the Optional Paper
Table
A
Make sure that the paper tray is
not being used.
B
Pull out the paper tray.
Note
Remove any remaining copy
paper.
C
While pressing the release lever,
adjust the back fence.
D
Release the side lever.
E
While pressing the release lever,
adjust the side fences.
Changing the Paper Size
3
103