Basic Functions; Adjusting Copy Image Density - Ricoh Aficio 220 Copy Reference Manual

Ricoh operating instructions printer/fax/scanner/copier 220, 270
Hide thumbs Also See for Aficio 220:
Table of Contents

Advertisement

Copying

Basic Functions

The following basic functions are ex-
plained in this section.

Adjusting Copy Image Density

Auto and Manual Image Density
2
Selecting the Original Type
Text, Text·Photo, Photo
Selecting the Copy Paper
Auto Paper Select and Manual Pa-
per Select
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See
Features 1/4".
You can change default settings for
basic functions. See
tings You Can Change with the User
Tools".
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three ways to specify image
density:
Auto Image Density
The machine automatically adjusts
the image density.
30
P.116 "1. General
P.116 "Set-
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
Reference
You can change the density level
with the user tools. See "10. Text
Density" in
Features 3/4".
A
Select one of the Image Density
modes.
Auto Image Density
A Make sure that the Auto Image
Density indicator is lit.
Note
If it is not, press the {Auto Im-
age Density} key.
Manual Image Density
A Press the {Auto Image Density}
key so the indicator goes out.
P.118 "1. General

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 270

Table of Contents