Combine; Stamp - Ricoh Aficio 220 Copy Reference Manual

Combine

Problem
Parts of the image are
not copied.
Order of copies is not
correct.

Stamp

Problem
Stamps do not appear
on copies.
Original image and
stamp overlap on cop-
ies and original image
cannot be read.
Page numbers do not
appear in the position
you require.
Cause
You specified an improper re-
production ratio that does not
meet the sizes of your origi-
nals and copy paper.
Your originals are not identi-
cal in size and direction.
You set originals in the incor-
rect order.
Cause
The original is not set correct-
ly.
The stamp is set to solid.
Your original has narrow
margins on four sides.
The numbering position is
wrong.
If You Cannot Make Copies as You Want
Action
When you specify a reproduc-
tion ratio using Manual Paper
Select mode, make sure the ra-
tio matches your originals and
the copy paper.
Note
Select the correct repro-
duction ratio before using
Combine mode.
Use originals that are identical
in size and direction.
When setting a stack of origi-
nal in the document feeder,
the last page should be on the
bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
Action
Set original correctly.
See P.75 "Preset Stamp—
Printing Preset Messages on
Your Copies".
Change to screen. See
"4 Stamp Setting 3/3".
Change the stamp position.
See P.127 "4 Stamp Setting
3/3".
Change the numbering posi-
tion.
See P.126 "4 Stamp Setting
2/3".
3
P.127
87