Getting Started; Package Contents - Cisco 7935 Quick Start Manual

Ip conference station

Hide thumbs Also See for 7935:

Table of Contents

Getting Started

This guide helps you quickly set up and use the Cisco IP Conference Station 7935. The IP Conference

Station requires Cisco CallManager and your system administrator must prepare the network for the

IP Conference Station. If a technician is not installing the IP Conference Station, verify with your

system administrator that the network is ready for the IP Conference Station. Be sure to read the

Release Notes and both the Parts List and the Safety Notices sections in this guide before you begin to

set up and use the IP Conference Station.

If your IP Conference Station is already set up, skip to Section 3, Features and Web Interface.

Note

Introduction

The Cisco IP Conference Station 7935 is an IP-based, hands-free conference room station that uses

Voice over IP (VoIP) technology. The IP Conference Station provides basic business conferencing

features and functions, such as Call Hold, Call Transfer, Call Release, Mute, and Conference, over an

IP network. It is designed to be used primarily on desktops and in small- to medium-sized conference

rooms to facilitate conference calling. It replaces a traditional analog conferencing unit in an

IP telephony network.

Review the following list to be sure that you have received all of the necessary items to install the

IP Conference Station.

• 1 Cisco IP Conference Station 7935

• 1 6 ft. CAT 5 Cable

• 1 25 ft. CAT 5 Cable

• 1 Power Interface Module (PIM)

• 1 Power Supply Unit (a country-specific power cord must be ordered separately)

• 1 Documentation Roadmap

• 1 Quick Start Guide

• 1 Quick Reference Card

• 1 Regulatory Compliance and Safety Information Guide

• 1 Warranty Card

Table of Contents