Volume Controls - Cisco 7935 Quick Start Manual

Picking Up Calls in Your Group
Call Pickup allows you to pick up incoming calls within your own group. When you activate Call
Pickup, it automatically dials the call pickup group number associated with the IP Conference Station.
If there is a call coming in on another telephone number in that same group, the call immediately
begins ringing on the IP Conference Station. If there is more than one incoming call in the pickup
group, then you receive the first unanswered call. If there is no unanswered call in the group when you
activate Call Pickup, then the IP Conference Station is available to receive the next call.
Press the Phone button.
Step 1
Press the PickUp softkey.
Step 2
Answer the incoming call that is redirected to the IP Conference Station.
Step 3
Picking Up Calls Outside Your Group
Group Call Pickup allows you to pick up incoming calls within your own group or in other groups.
You must dial the appropriate call pickup group number when using this feature.
If there is a call coming in on another telephone number in the call pickup group you dialed, that call
immediately begins ringing on the IP Conference Station. If there is more than one incoming call in the
pickup group, then you receive the first unanswered call. If there is no unanswered call in the group,
or if you dial an invalid call pickup group number, you receive a fast busy tone.
Press the Phone button.
Step 1
Step 2 Press the GPickUp softkey.
Dial the desired group call pickup number.
Step 3
Answer the incoming call that is redirected to the IP Conference Station.
Step 4
To dial a different group call pickup number, hang up and begin again at Step 1.
Step 5

Volume Controls

To adjust the speakerphone volume
• Press the Up or Down volume button to increase or decrease the volume.
24